Bosch Purion 400 display retrofit kit for Bosch smartsystem
Bosch Purion 400 display & retrofit kit
Compatible with all motors and batteries in the Bosch smart system.
Installation
Method 1
Bosch Purion 400 display with Bosch System Controller and the Bosch Mini Remote. Also required, Bosch Y display cable. The Y cable is connected to the motor, System Controller and Purion 400. The Mini Remote on the handlebar is connected to the system via Bluetooth.
Method 2
Bosch Purion 400 display with Bosch LED Remote. Also required Bosch display cable, which is available in various lengths. The display cable connects the motor to the Purion 400.
Contents
- 1x Purion 400 display
- 1x Bracket 31.8mm or 35mm - select correct size for handle bar (check bike spec)
- 1x Screw M4x10.5
- 1x Operating and installation instructions
When retrofitting the Purion 400 with Y cable assembly, please order the blanking plug to close the unused display port on the Purion 400 separately.
Description
- Transmissive 1.6-inch TFT display (320 x 160 pixels)
- IP55 protected against water splash and dust
- Positioned in the handlebar triangle to protect the display
- Operation via the LED Remote or Mini Remote (in conjunction with the System Controller)
- Audible signals for navigation and system cues
Connectivity
- Recording activities via LED Remote, System Controller and eBike Flow app
- Remaining range overview depending on the various riding modes
- Warnings if state of charge of the phone drops below 30%
- Customisation of the status bar (display of state of charge, time or speed)
- Software updates via eBike Flow app
- Additional features: Shift recommendation, display of riding and fitness data, display when walk assistance and light are activated
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Bosch Purion 400 display retrofit kit for Bosch smartsystem
Bosch Purion 400 display retrofit kit for Bosch smartsystem
Bosch Purion 400 display & retrofit kit
Compatible with all motors and batteries in the Bosch smart system.
Installation
Method 1
Bosch Purion 400 display with Bosch System Controller and the Bosch Mini Remote. Also required, Bosch Y display cable. The Y cable is connected to the motor, System Controller and Purion 400. The Mini Remote on the handlebar is connected to the system via Bluetooth.
Method 2
Bosch Purion 400 display with Bosch LED Remote. Also required Bosch display cable, which is available in various lengths. The display cable connects the motor to the Purion 400.
Contents
- 1x Purion 400 display
- 1x Bracket 31.8mm or 35mm - select correct size for handle bar (check bike spec)
- 1x Screw M4x10.5
- 1x Operating and installation instructions
When retrofitting the Purion 400 with Y cable assembly, please order the blanking plug to close the unused display port on the Purion 400 separately.
Description
- Transmissive 1.6-inch TFT display (320 x 160 pixels)
- IP55 protected against water splash and dust
- Positioned in the handlebar triangle to protect the display
- Operation via the LED Remote or Mini Remote (in conjunction with the System Controller)
- Audible signals for navigation and system cues
Connectivity
- Recording activities via LED Remote, System Controller and eBike Flow app
- Remaining range overview depending on the various riding modes
- Warnings if state of charge of the phone drops below 30%
- Customisation of the status bar (display of state of charge, time or speed)
- Software updates via eBike Flow app
- Additional features: Shift recommendation, display of riding and fitness data, display when walk assistance and light are activated
Original: $148.01
-65%$148.01
$51.80Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Bosch Purion 400 display & retrofit kit
Compatible with all motors and batteries in the Bosch smart system.
Installation
Method 1
Bosch Purion 400 display with Bosch System Controller and the Bosch Mini Remote. Also required, Bosch Y display cable. The Y cable is connected to the motor, System Controller and Purion 400. The Mini Remote on the handlebar is connected to the system via Bluetooth.
Method 2
Bosch Purion 400 display with Bosch LED Remote. Also required Bosch display cable, which is available in various lengths. The display cable connects the motor to the Purion 400.
Contents
- 1x Purion 400 display
- 1x Bracket 31.8mm or 35mm - select correct size for handle bar (check bike spec)
- 1x Screw M4x10.5
- 1x Operating and installation instructions
When retrofitting the Purion 400 with Y cable assembly, please order the blanking plug to close the unused display port on the Purion 400 separately.
Description
- Transmissive 1.6-inch TFT display (320 x 160 pixels)
- IP55 protected against water splash and dust
- Positioned in the handlebar triangle to protect the display
- Operation via the LED Remote or Mini Remote (in conjunction with the System Controller)
- Audible signals for navigation and system cues
Connectivity
- Recording activities via LED Remote, System Controller and eBike Flow app
- Remaining range overview depending on the various riding modes
- Warnings if state of charge of the phone drops below 30%
- Customisation of the status bar (display of state of charge, time or speed)
- Software updates via eBike Flow app
- Additional features: Shift recommendation, display of riding and fitness data, display when walk assistance and light are activated
